Что (кто) такое interrupt handler - определение

COMPUTING FUNCTION TRIGGERED BY AN INTERRUPT

Interrupt service routine; Interrupt routines; Interrupt Handler; Interrupt Service Routine; FLIH; SLIH

interrupt handler

<software> A routine which is executed when an interrupt occurs. Interrupt handlers typically deal with low-level events in the hardware of a computer system such as a character arriving at a serial port or a tick of a real-time clock. Special care is required when writing an interrupt handler to ensure that either the interrupt which triggered the handler's execution is masked out (inhibitted) until the handler exits, or the handler is re-entrant so that multiple concurrent invocations will not interfere with each other. If interrupts are masked then the handler must execute as quickly as possible so that important events are not missed. This is often arranged by splitting the processing associated with the event into "upper" and "lower" halves. The lower part is the interrupt handler which masks out further interrupts as required, checks that the appropriate event has occurred (this may be necessary if several events share the same interrupt), services the interrupt, e.g. by reading a character from a UART and writing it to a queue, and re-enabling interrupts. The upper half executes as part of a user process. It waits until the interrupt handler has run. Normally the {operating system} is responsible for reactivating a process which is waiting for some low-level event. It detects this by a shared flag or by inspecting a shared queue or by some other synchronisation mechanism. It is important that the upper and lower halves do not interfere if an interrupt occurs during the execution of upper half code. This is usually ensured by disabling interrupts during critical sections of code such as removing a character from a queue. (2002-07-24)

Interrupt handler

In computer systems programming, an interrupt handler, also known as an interrupt service routine or ISR, is a special block of code associated with a specific interrupt condition. Interrupt handlers are initiated by hardware interrupts, software interrupt instructions, or software exceptions, and are used for implementing device drivers or transitions between protected modes of operation, such as system calls.

https://en.wikipedia.org/wiki/Interrupt_handler

Raster interrupt

COMPUTER INTERRUPT SIGNAL

Horizontal blank interrupt; Display list interrupt

A raster interrupt (also called a horizontal blank interrupt) is an interrupt signal in a legacy computer system which is used for display timing. It is usually, though not always, generated by a system's graphics chip as the scan lines of a frame are being readied to send to the monitor for display.

https://en.wikipedia.org/wiki/Raster_interrupt

Википедия

Interrupt handler

In computer systems programming, an interrupt handler, also known as an interrupt service routine or ISR, is a special block of code associated with a specific interrupt condition. Interrupt handlers are initiated by hardware interrupts, software interrupt instructions, or software exceptions, and are used for implementing device drivers or transitions between protected modes of operation, such as system calls.

The traditional form of interrupt handler is the hardware interrupt handler. Hardware interrupts arise from electrical conditions or low-level protocols implemented in digital logic, are usually dispatched via a hard-coded table of interrupt vectors, asynchronously to the normal execution stream (as interrupt masking levels permit), often using a separate stack, and automatically entering into a different execution context (privilege level) for the duration of the interrupt handler's execution. In general, hardware interrupts and their handlers are used to handle high-priority conditions that require the interruption of the current code the processor is executing.

Later it was found convenient for software to be able to trigger the same mechanism by means of a software interrupt (a form of synchronous interrupt). Rather than using a hard-coded interrupt dispatch table at the hardware level, software interrupts are often implemented at the operating system level as a form of callback function.

Interrupt handlers have a multitude of functions, which vary based on what triggered the interrupt and the speed at which the interrupt handler completes its task. For example, pressing a key on a computer keyboard, or moving the mouse, triggers interrupts that call interrupt handlers which read the key, or the mouse's position, and copy the associated information into the computer's memory.

An interrupt handler is a low-level counterpart of event handlers. However, interrupt handlers have an unusual execution context, many harsh constraints in time and space, and their intrinsically asynchronous nature makes them notoriously difficult to debug by standard practice (reproducible test cases generally don't exist), thus demanding a specialized skillset—an important subset of system programming—of software engineers who engage at the hardware interrupt layer.

https://en.wikipedia.org/wiki/Interrupt handler